Pillow Block Housings
The bearing housings are predominantly made from flake graphite cast iron. We can supply housings made from cast steel or spheroidal graphite cast iron by agreement. Since the bearings are generally lubricated with grease and the initial grease filling lasts for a long period, most housings do not have relubrication holes. However, there are cast-on bosses or marks present so that lubrication holes can be made if necessary. If relubrication is carried out, it must be ensured that excess grease is allowed to escape.
- overall length: Dodge HAY2520USAF307TT Pillow Block Housings
- Dodge
- HAY2520USAF307TT
- overall length: Timken (Torrington) SAF 622 X 4 Pillow Block Housings
- Timken (Torrington)
- SAF 622 X 4
- SKF SE 511-609 Pillow Block Housings
- SKF
- SE 511-609
- compatible bore diameter: Dodge 2 15/16CSD OUTER HSG ASSY 2B EXP Pillow Block Housings
- Dodge
- 2 15/16CSD OUTER HSG ASSY 2B EXP
- base width: FAG (Schaeffler) SNV180-F-L Pillow Block Housings
- FAG (Schaeffler)
- SNV180-F-L
- base to bore centerline: Timken SNT 510-608 Pillow Block Housings
- Timken
- SNT 510-608
- finish/coating: Dodge CHAY4516USAF211TT Pillow Block Housings
- Dodge
- CHAY4516USAF211TT
- Miether Bearing Prod (Standard Locknut) SAFS 320 Pillow Block Housings
- Miether Bearing Prod (Standard Locknut)
- SAFS 320
- housing construction: Timken (Torrington) SAF 230 Pillow Block Housings
- Timken (Torrington)
- SAF 230
- Dodge 130779 Pillow Block Housings
- Dodge
- 130779
- base to bore centerline: Timken (Torrington) SAFS 534 Pillow Block Housings
- Timken (Torrington)
- SAFS 534